USB Power Module Case 40x20x11mm – Pack of 2

Description

What it is

This item includes two protective cases for USB power module, suitable for electronic projects such as those based on Arduino, 3D printing, and drones. The cases are designed to contain USB power modules with dimensions of 40x20x11mm.

Features

• Dimensions: 40x20x11mm
• Number of pieces: 2
• Ideally suited for USB power modules

What it is for

These protective cases are useful for protecting and organizing USB power modules in electronic projects. They are ideal for applications requiring electrical and physical stability, such as 3D printing or drone projects. Additionally, they can be used to ensure compatibility with various electronic devices, including Arduino and ESP.

Tutorial: How to Use USB Power Module Cases

These protective cases are ideal for protecting and organizing your USB power modules, ensuring they are securely mounted and protected from any potential damage.

What you need

• USB Power Module
• Spacers
• Connection Wire
• Soldering Tools
• Mounting Pins

Steps

1. Open the USB power module and check that it is compatible with the case size (40x20x11mm).
2. Insert the USB power module into the case, making sure it is centered.
3. If necessary, solder the mounting pins inside the case to secure the module.
4. Connect the power and data wires of the USB power module to the connectors of the case.
5. Check the stability of the module inside the case and ensure there are no excess parts that could cause short circuits.
6. If necessary, add spacers to prevent unwanted contacts.
7. Close the case, ensuring it is securely fastened and that the module is protected.
8. Check the final installation and operation of the power module inside the case.

Mini project

Create a protected power system for a 3D printing or drone project, using the USB power module case to protect the module and ensure its stability during use.

Common mistakes

• Do not check the compatibility of the module with the case before installation.
• Omit securing the module inside the case, causing stability issues.
• Do not use spacers to avoid unwanted contacts.
• Do not check the operation of the module after installation in the case.

Recommended accessories

• USB Power Module
• Connection Wire
• Mounting Pin
• Soldering Tools

Frequently asked questions

How can I verify the compatibility of the module?
Check the dimensions of the module on the datasheet and compare it with the case dimensions (40x20x11mm).

Can I use these cases for other modules as well?
If the module dimensions are compatible (40x20x11mm), then yes. Otherwise, check the datasheet to find the appropriate case.