DB-268 Hydroelectric Flow Sensor Water Meter 2.5-25L/min DC12V G1/2

Description

What it is

The DB-268 Hydroelectric Flow Sensor Water Flow Meter is a device for measuring water flow in irrigation, monitoring, and control systems. It operates on a 12V DC supply voltage.

Features

• Operating Voltage: 12V DC
• Water Flow Measurement Range: 2.5-25L/min
• Connection: G1/2

What it is for

Ideal for projects requiring water flow monitoring and control, such as automatic irrigation systems. Can be used by beginners and experts.

Tutorial: How to Use Flow Meter 2.5-25L/min

This sensor measures water flow for projects that require flow control. Useful for beginners and intermediates.

What you need

• Flow Meter 2.5-25L/min DB-268
• Arduino
• 12V DC Power Cable
• 10kΩ Resistor

Steps

1. 1. Check that the flow meter works with the DC12V supply.
2. 2. Connect the 12V power cable to the flow meter.
3. 3. Connect the flow meter to pin A0 of Arduino.
4. 4. Connect the 10kΩ resistor between GND and pin A0 for protection.
5. 5. Load the Arduino code.
6. 6. Check the datasheet for further details.
7. 7. Test the water flow and verify the reading.
8. 8. Configure the code to display the data on an LCD or send it to an app

Example code

```
void setup() {
  Serial.begin(9600);
}

void loop() {
  int flow = analogRead(A0);
  Serial.println(flow);
  delay(1000);
}
```

Mini project

Build an automatic irrigation system in 30 minutes using the flow meter to control the water flow.

Common mistakes

• Do not use voltages other than 12V DC.
• Do not connect the flow meter directly to Arduino without a resistor.
• Do not read the flow directly without calibration.
• Do not forget to check compatibility with your project.

Recommended accessories

• LCD Display
• Water Pump
• Level Sensors
• 12V DC Power Cable

Frequently asked questions

Does the flow meter work with voltages other than 12V DC?
Check the datasheet for further details.

How can I calibrate the flow meter?
Follow the specific instructions in the datasheet.

Does the flowmeter work with flows above 25L/min?
No, the flowmeter works in the range 2.5-25L/min.