50 Pieces 0.15 ohm 1/4w 1/4w 5%

Description

50PCS 0.15 ohm 1/4w 1/4 w 5%
We have datasheets available for all components, if not present in the product download sheet, send us a message from the contact us module and we will publish it as soon as possible on our website.

Tutorial: How to use 0.15 ohm Resistor

This 0.15 ohm resistor is ideal for those learning electronics, Arduino projects, or small DIY applications that require a low-value component.

What you need

• Arduino Uno
• head pin connectors

Steps

1. Check the product resistance on the datasheet.
2. Connect the connector to the Arduino digital port.
3. Write a simple sketch to measure the resistance with the Arduino.
4. Test the resistance with various voltage values and observe the differences.

Example code

int ledPin = 13;
void setup() {
pinMode(ledPin, OUTPUT);
}

void loop() {
digitalWrite(ledPin, HIGH); // accendi il LED
}

Mini project

Create a simple circuit to measure the resistance and display the values on the serial monitor.

Common mistakes

• Using too high a voltage that damages the resistor.
• Do not check the value of the resistor before using it.
• Connect to the circuit without an appropriate protoboard.

Recommended accessories

• Arduino Uno
• Protoboard
• Digital multimeter

Frequently asked questions

How can I check the resistance?
Use a multimeter to measure it or write an Arduino sketch to read it.

Can I use this resistor with any circuit?
Check that the electrical value is adequate for your project.