5 Pieces AMS1117-3.3V IC Integrated Circuits

Description

Tutorial: How to Use AMS1117-3.3V (Voltage Regulator)

The AMS1117-3.3V voltage regulator is ideal for powering low-voltage circuits. Suitable for beginners.

What you need

• Arduino Uno
• variable resistor pack
• connection wires

Steps

1. Connect the regulator input to the power source
2. Connect the ground to the GND pin of the regulator
3. Power the circuit with a value above 3.4V (check the datasheet)
4. Verify that the output voltage is stable at 3.3V
5. Connect the output to the device to be powered

Mini project

Portable power supply for Arduino with battery level sensor

Common mistakes

• Use an input voltage lower than 3.4V
• Incorrectly connect the ground
• Omit the bypass capacitor

Recommended accessories

• Electrolytic capacitors
• Variable resistors

Frequently asked questions

What is the minimum input voltage?
3.4V (check the datasheet)

Do you need a bypass capacitor?
Yes, recommended for stability