3V Coin Cell Vibration Motor 0827 8mm

Description

What it is

The 3V 0827 8mm Mobile Phone Vibration Motor is a small electric motor designed to generate vibrations. It can be used in a variety of electronic projects, adding an interactive element.

Features

• Operating Voltage: 3V
• Dimensions: 8mm
• Model: 0827

What it is for

This vibration motor is ideal for small projects, such as digital watches with a vibration notification indicator. It can also be used in robotics and DIY projects to add tactile feedback. Compatibility with Arduino or ESP is verified in the datasheet.

Tutorial: How to use the 0827 Mobile Phone Vibration Motors

This small vibration motor, ideal for small projects, serves to add an interactive element to your creations. Useful for beginner and intermediate makers.

What you need

• 0827 Vibration Motors
• Arduino or compatible microcontroller
• 220 Ohm resistor
• Perfect connector for 0827

Steps

1. 1. Check the motor specifications on the datasheet.
2. 2. Connect the motor to the microcontroller using the 0827 connector.
3. 3. Connect the 220 Ohm resistor between the power pin and the ground pin of the motor.
4. 4. Load the following code onto your microcontroller.
5. 5. Activate the programmed vibration.
6. 6. Check the proper functioning of the motor.
7. 7. Safely install the motor in your project.
8. 8. Test the motor at various angles to ensure it works correctly.

Example code

```
void setup() {
  pinMode(2, OUTPUT);
}

void loop() {
  digitalWrite(2, HIGH);
  delay(1000);
  digitalWrite(2, LOW);
  delay(1000);
}
```

Mini project

Create a small digital clock with a vibration notification indicator.

Common mistakes

• Do not check the specifications on the datasheet.
• Ignore the protective resistor.
• Connect the motor directly to the power supply without a resistor.
• Do not test the motor before installation.

Recommended accessories

• 220 Ohm resistor
• Arduino Uno Microcontroller
• Perfect connector for 0827
• PCB mounting board

Frequently asked questions

Does the motor vibrate only for a short moment?
Check the resistor and control code.

How can I check if the motor is damaged?
Check the connections and the code. If everything is correct, check the resistor and the motor itself.

Can I use a different power supply than 3V?
Check the datasheet to see if the motor supports other voltages.