YB4835VA 300V 500A Digital Voltmeter and Ammeter Dual LED Green and Red Display

Description

What it is

YB4835VA is a digital voltmeter and ammeter that allows you to measure both voltage and current in a circuit. The green and red LED display clearly and legibly indicates the measured values.

Features

• Maximum voltage measured: 300V
• Maximum current measured: 500A
• Display: Green and red LED

What it is for

The YB4835VA is useful for monitoring voltage and current intensity in electronic circuits, for example in a power supply circuit. It can be used by beginner and intermediate makers for building and testing circuits.

Tutorial: How to use Voltmeter and Ammeter YB4835VA

This digital voltmeter and ammeter is ideal for monitoring voltage and current intensity in electronic circuits. Useful for beginner and intermediate makers.

What you need

• Voltmeter and Ammeter YB4835VA
• Arduino
• Connection cable
• Pull-up resistor (10kΩ)

Steps

1. 1. Check the datasheet for maximum voltage specifications (300V).
2. 2. Connect the YB4835VA to the Arduino using the VCC and GND pins.
3. 3. Connect the positive terminal to the circuit to be monitored.
4. 4. Connect the negative terminal to the circuit to be monitored.
5. 5. Connect the pull-up resistor (10kΩ) between VCC and VOUT.
6. 6. Check the datasheet for maximum current specifications (500A).
7. 7. Load the Arduino code.
8. 8. Display the values on the Dual LED Green and Red Display.

Mini project

Build a simple power supply circuit with a voltage generator. Connect the YB4835VA to monitor the voltage and current.

Common mistakes

• Connecting the YB4835VA to voltages above 300V can damage the component.
• Do not use currents above 500A, otherwise you may damage the YB4835VA.
• Do not use pull-up resistors other than 10kΩ.
• Do not connect the YB4835VA directly to currents above 500A.

Recommended accessories

• Voltage Generator
• Multimeter
• Connection Wire
• Pull-up Resistor (10kΩ)

Frequently asked questions

Can the YB4835VA be used with Arduino?
Yes, the YB4835VA can be used with Arduino, but make sure to follow the voltage and current specifications.

What are the maximum voltage and current specifications?
Maximum Voltage: 300V, Maximum Current: 500A.

Can I use a different pull-up resistor than 10kΩ?
No, use a 10kΩ pull-up resistor to ensure proper operation.

Can the YB4835VA be used with AC circuits?
Check the datasheet for AC circuit specifications.