XH-M164 NE5532 Bass Treble Control Mixer

Description

What it is

The XH-M164 Texas AUDIO NE5532 is an audio mixer designed for bass treble regulation. Using the NE5532 integrated circuit, this mixer offers precise bass tone control.

Features

• Brand: XH-M164
• Integrated Circuit: NE5532
• Function: Bass mixer with treble regulation
• SKU: ARD0011313
• Price: 8.62 €

What it is for

The XH-M164 Texas AUDIO NE5532 can be used in audio projects to improve sound quality. It is suitable for building audio amplification systems for small speakers or for bass tone regulation in other electronic projects.

Tutorial: How to use XH-M164 Texas AUDIO pitch NE5532

The XH-M164 Texas AUDIO pitch NE5532 is an audio mixer for bass treble regulation. Useful for audio and electronic projects.

What you need

• XH-M164 Texas AUDIO pitch NE5532
• Power Supply (5-15V)
• 10kΩ resistor for each channel
• Audio connector (3.5mm jack)

Steps

1. 1. Check the datasheet for power supply specifications.
2. 2. Assemble the circuit on a protoboard.
3. 3. Connect the power pins (VCC and GND) to a stable power source.
4. 4. Connect the audio jacks to the mixer.
5. 5. Set the resistor for each channel (A and B) to adjust the treble.
6. 6. Verify operation with an oscilloscope.
7. 7. Adjust the resistors until you achieve the desired sound.
8. 8. Test the system with a test audio signal.

Mini project

Build an audio amplification system for a small speaker.

Common mistakes

• Incorrect power supply: ensure a stable power supply between 5-15V.
• Incorrect resistors: use 10kΩ resistors for each channel.
• Incorrect connections: carefully check electrical connections.
• Missing audio source: ensure an audio source is connected (test audio or audio device).

Recommended accessories

• Oscilloscope
• Speaker
• 5-15V power supply
• 10kΩ resistors

Frequently asked questions

How can I adjust the treble?
Set the resistance for each channel (A and B) until you get the desired sound.

What are the power supply specifications?
Check the datasheet, but generally it is between 5-15V.

Can I use resistors other than 10kΩ?
Check the datasheet, but 10kΩ is the recommended value.

Does the mixer work with more channels?
This mixer has two channels (A and B).