Stereo Mini Audio Hi-Fi Audio Amplifier Board PAM8610 2x10W 12V Dual Channel

Description

What it is

The stereo mini audio Hi-Fi PAM8610 2X10W 12V dual channel audio amplifier board is an audio amplifier integrated circuit in board format. It allows amplifying a stereo audio signal and powering two speakers.

Features

• Audio Amplifier Chip: PAM8610
• Output Power: 2X10W
• Power Supply: 12V
• Dual Channel Stereo

What it is for

The board is suitable for Hi-Fi audio projects, such as home or ambient sound systems. It is ideal for beginner and intermediate makers. It can be used to amplify audio signals coming from microcontrollers like Arduino or ESP, powering two speakers.

Tutorial: How to use Stereo Mini Audio Hi-Fi PAM8610 Audio Amplifier Board

This miniaturized audio amplifier is ideal for stereo audio projects, such as home or ambient sound systems. It is perfect for beginner and intermediate makers.

What you need

• PAM8610 Audio Board
• 12V Power Supplies
• Stereo speakers
• Arduino or microcontroller with audio outputs

Steps

1. 1. Check if the board has a power LED. If present, ensure it is on.
2. 2. Connect the 12V power supplies to the VCC and GND pins of the board.
3. 3. Connect the speaker terminals to the OUT+ and OUT- pins.
4. 4. Connect the audio signals (LINEOUT) to the microcontroller or audio device.
5. 5. Check the datasheet for specific power and signal pins.
6. 6. Check the polarity of the speaker connectors.
7. 7. Verify that the audio signals are correct and that there are no interferences.
8. 8. Turn on the microcontroller or audio device and check the audio.

Mini project

Create a home audio system with a PAM8610 audio board, an Arduino microcontroller, and two speakers. Connect the audio signals to the microcontroller and listen to the music.

Common mistakes

• Connect the speakers with reversed polarity.
• Do not check the power and signal pins on the datasheet.
• Power the board with voltages other than 12V.
• Ignore audio signals before connecting them.

Recommended accessories

• Speakers
• Arduino microcontroller
• Audio connection cable
• 12V power supplies

Frequently asked questions

What audio signals are needed for the board?
The audio signals should be in line-out format with an output voltage of 2Vpp.

Can I use a voltage different from 12V?
Check the datasheet for supported power supply voltage values.

Which audio signals should be connected?
Connect the audio signals to the LINEOUT pin of the board.