SSR Single Phase SSR-60LA Solid State Relay

Description

What it is

The SSR-60LA is a solid state relay (SSR) designed for safely and quietly controlling electrical circuits. It is ideal for applications requiring the control of devices from 12V to 250V.

Features

• Type: Solid State Relay (SSR)
• Operating Voltage Range: 12V – 250V

What it is for

The SSR-60LA is suitable for projects that require electrical control, such as creating an automatic lighting system with Arduino or ESP. It is suitable for both beginners and intermediates.

Tutorial: How to Use SSR-60LA

The SSR-60LA is a solid state relay ideal for controlling electrical devices from 12V to 250V. Useful for beginners and intermediates who want to automate their home or projects.

What you need

• SSR-60LA
• Arduino
• Connection Wires
• Power Supply

Steps

1. 1. Check the compatibility of your device with the SSR-60LA.
2. 2. Prepare the necessary connection wires.
3. 3. Connect the +5V or 3.3V of Arduino to Vcc (red).
4. 4. Connect GND of Arduino to GND (black).
5. 5. Connect the command line (blue) to the COM contact of the relay.
6. 6. Connect the control line (green) to the digital pin of Arduino.
7. 7. Connect the ground line (black) to the NC or NO contact of the relay.
8. 8. Test the circuit with a sample program.

Example code

void setup() {} void loop() { digitalWrite(2, HIGH); delay(5000); digitalWrite(2, LOW); delay(5000); }

Mini project

Create an automatic lighting system with a light sensor.

Common mistakes

• Connect Vcc to GND.
• Forget to add a pull-down or pull-up resistor.
• Use a digital pin that is not available.
• Do not test the circuit before connecting it to a real device.

Recommended accessories

• Light sensor
• 2P relay
• Pull-down resistor
• Power cable

Frequently asked questions

Can I use the SSR-60LA with a microcontroller other than Arduino?
Yes, the SSR-60LA can be used with any microcontroller that supports digital signals.

How long can the controlled device remain on?
Check the datasheet for maximum on and off times.

What to do if the relay does not work?
Check connections, verify correct polarity, and ensure the voltage is correct.

Can I use the SSR-60LA to control devices at 220V?
Check the datasheet, the SSR-60LA supports voltages up to 250V.