EN
IT Italiano
ES Español
FR Français
DE Deutsch
Description
Passive PoE RJ45 Splitter Injector Adapter Power over Ethernet Kit
The complete Passive Power over Ethernet set includes two pieces: INJECTOR and SPLITTER. Suitable for use with products that fundamentally do not support Power Over Ethernet. Passive Power over Ethernet SET applicable to a wide range of network products such as Access Point, router, IP cameras, modem, switch, embedded computer or other network devices. Passive Power over Ethernet SET compatible with most devices available on the market such as D-Link, Linksys, Airlive, Senao, Wline, Micronet, Edimax etc. Devices can be supplied in series up to 50V. (Power adapter not included – possible to use the power adapter of the powered device such as access point, IP camera etc.) The range of passive PoE is normally 30-40 meters / 100-130 feet (the actual distance depends on the power supply, the type of cable and the powered device).
1. Very simple to connect a passive PoE. Connect the Ethernet at the bottom.
Passive PoE connector for PC, Hub or Switch and connect the power adapter
to the power outlet.
2. At the opposite end (RJ port) connect the Ethernet cable that goes to the end.
3. At the top end, connect the Ethernet cable end to the RJ port and connect
the power and Ethernet connectors to the powered equipment. The equipment is now
connected to each other.
Includes: INJECTOR and SPLITTER.
Complete set for a wide range of network products such as Access Point, Router, IP cameras, modems, switches, embedded computers or other network devices like D-Link, Ovislink, Senao, Wline, RouterBOARD, WRAP and other devices that use passive PoE injection.
Connector diameter of the connector 2,1 mm (5,5 x 2,1 mm)
Power pin 4,5 + and 7,8 –
1. Very simple to connect a passive PoE. Connect the Ethernet at the bottom.
Passive PoE connector for PC, Hub or Switch and connect the power adapter
to the power outlet.
2. At the opposite end (RJ port) connect the Ethernet cable that goes to the end.
3. At the top, connect the Ethernet cable end to the RJ port and connect
the power and Ethernet connectors to the powered equipment. The equipment is now
connected to them.
We have datasheets for all components, if not present in the product download sheet, send us a message from the contact us module and we will publish it as soon as possible on our website.
Tutorial: How to use Passive PoE RJ45 Splitter Kit
The passive PoE splitter kit is a useful device for separating the power and data signals in a single Ethernet cable. Ideal for anyone who wants to power remote devices without the need to modify the cable.
What you need
- Passive PoE Splitter Kit RJ45
- Ethernet cable cat5/cat6
- Powered device
Steps
- Check that the kit is complete and in good condition.
- Connect one end of the Ethernet cable to the source device (PoE injector).
- Connect the other end of the cable to one of the two RJ45 ports on the passive splitter.
- Connect the Ethernet cable from the second port of the splitter to the powered device.
- Verify that the device is now powered and operational.
Mini project
Create a remote monitoring system with a PoE-powered IP camera using this passive splitter kit.
Common mistakes
- Use an incompatible Ethernet cable
- Do not verify the correct connection of the device
- Ignore power supply verification
Recommended accessories
- Ethernet cable cat5/cat6 (ARD00420)
- PoE injector (ARD00418)
- PoE-powered IP camera (ARD00430)
Frequently asked questions
Does the kit work with all devices?
Check the device datasheet to see if it is compatible with PoE.
Can I use an Ethernet cable of any length?
The recommended maximum length for effective data and power transmission is 100 meters.
Reviews
There are no reviews yet.