FT245 EVAL Board FT245R FT245RL USB to Parallel FIFO Evaluation Kit (Green)

Description

What it is

FT245 EVAL Board FT245R FT245RL is a development evaluation kit that enables USB to parallel FIFO communication.

Features

• USB to Parallel FIFO Converter
• Color: green
• SKU: ARD009360
• Price: 22.95 €

What it is for

The FT245 EVAL Board is ideal for makers and students who want to explore the FIFO protocol without having to manage hardware complexities. It can be used to create simple monitoring systems that receive and record data from sensors connected to the module.

Tutorial: How to use FT245 EVAL Board

The FT245 EVAL Board is a development module that enables USB to parallel FIFO communication. It is ideal for makers and students who want to explore the FIFO protocol without having to manage hardware complexities.

What you need

• Arduino Uno or compatible
• FT245 EVAL Board
• USB A-Micro B cable
• FTDI D2XX Software

Steps

1. Connect the FT245 EVAL Board to the Arduino using the USB cable.
2. Install the FTDI D2XX driver on your computer (check the datasheet for precise instructions).
3. Load the provided sketch onto the Arduino.
4. Open the serial monitor in the Arduino development software and check the output.
5. Verify that the data is being sent correctly from the module to the computer.
6. Try modifying the code to see how it changes the data flow.

Example code

/* FT245 EVAL Board Sketch */

void setup() {
  Serial.begin(9600);
}

void loop() {
  // Inserisci qui la logica del tuo progetto per inviare dati al modulo.
}

Mini project

Create a simple monitoring system that receives and logs data from the temperature sensor connected to the FT245 EVAL Board.

Common mistakes

• Driver installation issues
• Incorrect baud rate configuration
• USB connection interrupted during sketch execution

Recommended accessories

• DS18B20 Temperature Sensor
• 16×2 LCD Display
• 5V Relay Module
• Controllable RGB LED

Frequently asked questions

How can I get the datasheet?
The datasheet is available on the FTDI manufacturer’s website.

Can it be used with Raspberry Pi?
Yes, but it might require a different driver than the one for Arduino.