Constant Current LED Driver Module XL4005 5A

Description

What it is

The XL4005 Constant Current LED Driver is a power supply module designed to power high-power LEDs. It ensures a stable constant current to the connected LED.

Features

• Maximum Current: 5A
• Current Regulation: Constant
• SKU: ARD009158
• Price: 5.84 €

What it is for

This driver is ideal for powering high-power LEDs in electronic projects, such as a bicycle headlight. The constant current ensures optimal LED operation, increasing both lifespan and brightness.

Tutorial: How to Use the XL4005 Constant Current LED Driver

The XL4005 Constant Current LED Driver is ideal for powering high-power LEDs. Useful for projects requiring a stable constant current.

What you need

• XL4005 Constant Current LED Driver
• High-power LEDs
• Protection Resistor (optional)
• DC Power Supply

Steps

1. 1. Check the power supply voltage: 3.3V – 36V.
2. 2. Check the datasheet for the maximum allowed current (5A).
3. 3. Connect the power supply negative to the GND pin of the module.
4. 4. Connect the power supply positive to the VCC pin of the module.
5. 5. Connect a high-power LED to the OUT pin.
6. 6. (Optional) Connect a protection resistor between OUT and GND.
7. 7. Check the LED current on the datasheet.
8. 8. Adjust the LED current with the potentiometer (if present).

Mini project

Build a bicycle headlight using a high-power LED and this driver. In 30 minutes you can have a working project.

Common mistakes

• Connect the power supply incorrectly.
• Set the LED current above the maximum allowed.
• Omit the protection resistor.
• Fail to check the LED current on the datasheet.

Recommended accessories

• High-power LED
• Protection resistor
• DC power supply
• Potentiometer (if needed)

Frequently asked questions

Does the module support low-voltage LEDs?
Check the datasheet for the minimum supply voltage of the LED.

How long can the module run?
The module can run indefinitely with proper power supply.

Can I use different LEDs with this module?
Check the total current and voltage on the datasheet.