4 Pieces 2N6027 Programmable Unijunction Transistor Bipolar IC

Description

4 Pieces 2N6027 Programmable Unijunction Transistor Bipolar IC Integrated Circuits

Component Specifications:

Type	PUT
Repetitive Peak Off-State Voltage	40V
Off-State Voltage	40V
Average On-State Current	150mA
Peak Gate Inverse Voltage	5V
Package Type	TO-92
Packaging	Bulk
Peak On-State Current (Max)	5A
Mounting	Through Hole
Pin Count	3
Operating Temperature Range	-50 °C to 100 °C
Operating Temperature Classification	Industrial

We have the technical specifications of all components available, if not present in the product download card, send us a message through the contact us form and we will publish it as soon as possible on our website.

Tutorial: How to Use Programmable Unijunction Transistor 2N6027

The programmable unijunction transistor (PUT) 2N6027 is used for various electronic applications such as impulse generation, oscillators, and protection circuits. This component is ideal for beginner and intermediate maker projects.

What you need

• Arduino Uno
• Breadboard
• Jumper Wires
• Resistors

Steps

1. Check the operating voltage of the device on the datasheet and connect the correct power supply to the breadboard.
2. Connect the E pin (emitter) to ground through a resistor.
3. Connect pin B (base) of the 2N6027 to pin 3 of Arduino for programming.
4. Connect pin C (collector) to the positive power supply of the circuit through a capacitor.
5. Write an Arduino sketch that sends PWM pulses to the base of the transistor.
6. Test the operation of the oscillator generated by the 2N6027 with an oscilloscope or multimeter.
7. Adjust the programming voltage to obtain the desired impedance as specified in the datasheet.
8. Verify that the circuit is stable and repeatable.

Mini project

BTU-based Oscillator: Build a simple oscillator with Arduino and the 2N6027 to generate pulses of various frequencies.

Common mistakes

• Use of voltage not conforming to the datasheet requirements.
• Lack of resistance between the base and ground during programming.
• Programming impedance not correctly regulated.
• Missing overvoltage protection.

Recommended accessories

• Arduino Uno
• Prototype Breadboard
• Jumper Wire Kit
• Various Capacitors

Frequently asked questions

What is the programming voltage of the 2N6027?
Check the datasheet.

How is the capacitor connected to the collector?
The capacitor should be connected between pin C and the positive power supply of the circuit.