Waterproof Digital NTC 10K Ohm Temperature Sensor Probe 1m

Description

What is it The waterproof digital NTC 10K Ohm temperature sensor probe is a tool for measuring temperature in various contexts. Its resistance varies with temperature, allowing for a digital reading. Features Sensor type: NTC Resistance value: 10K Ohm Waterproof Cable length: 1m What can it be used for The probe is ideal for electronic projects, IoT and applications in humid or outdoor environments. It can be used to create temperature alarm systems for external environments, monitor temperature in controlled environments, or for 3D printing applications. Tutorial: How to use Waterproof NTC 10K Ohm Temperature Sensor Probe The waterproof NTC 10K Ohm temperature sensor probe is ideal for measuring temperature in humid or outdoor environments. It is perfect for DIY projects, 3D printing, and temperature control systems. What you need Arduino Uno Jumper cable Computer with Arduino IDE installed Steps Connect the jumper cable between the NTC probe (VCC pin) and the 5V output of the Arduino. Connect another jumper cable from the NTC probe GND pin to any of the Arduino GND pins. Connect the DATA pin of the probe to a digital pin on the Arduino (e.g., A0). Open Arduino IDE and upload the following sketch to read the temperature. Check the received data on the Arduino serial monitor. Calibrate the sensor if necessary by consulting the datasheet. Example code: const int tempPin = A0; void setup() { Serial.begin(9600); } void loop() { int sensorValue = analogRead(tempPin); float voltage = (sensorValue / 1024.0) * 5.0; float resistance = ((1023.0 – sensorValue) * 10000.0) / sensorValue; // check datasheet Serial.print(