Description
Technical Description
The Hall Effect Reed Sensor Magnetic Switch + PIR Motion Sensor + Infrared Sensor Module Kit is a set of three electronic sensor modules designed for use in electronic prototyping projects, primarily with Arduino. This kit includes a Hall effect sensor module, a PIR motion sensor, and an infrared sensor module for obstacle detection.
The Hall effect sensor module is used to detect the presence of magnetic fields, the PIR motion sensor detects human movement through body temperature analysis, while the infrared sensor module is used for obstacle detection through the transmission and reception of infrared pulses.
These modules are suitable for applications requiring motion detection, magnetic field presence, or obstacle avoidance in domestic or industrial environments.
Key Specifications
| Parameter | Value |
| Hall Sensor Model | FC-01 |
| PIR Motion Sensor Model | HC-SR501 |
| Infrared Sensor Model | N/D (see manufacturer’s datasheet) |
| Quantity Hall Sensor | 1 |
| Quantity PIR Motion Sensor | 1 |
| Quantity Infrared Sensor | 1 |
| Hall Sensor Power Supply | N/D (see manufacturer’s datasheet) |
| PIR Motion Sensor Power Supply | N/D (see manufacturer’s datasheet) |
| Infrared Sensor Power Supply | N/A (see manufacturer’s technical sheet) |
| Sensor Hall Dimensions | N/A (see manufacturer’s technical sheet) |
| PIR Motion Sensor Dimensions | N/A (see manufacturer’s technical sheet) |
| Infrared Sensor Dimensions | N/A (see manufacturer’s technical sheet) |
| Sensor Hall Interface | N/A (see manufacturer’s technical sheet) |
| PIR Motion Sensor Interface | N/A (see manufacturer’s technical sheet) |
| Infrared Sensor Interface | N/A (see manufacturer’s technical sheet) |
| Container | N/A (see manufacturer’s technical sheet) |
Installation and Usage
- Check that all modules are present in the kit.
- Connect the Hall sensor module to the Arduino digital pin.
- Connect the PIR motion sensor to a digital pin on the Arduino.
- Connect the infrared sensor module to a digital pin on the Arduino.
- Test the sensors with a simple test sketch.
Compatibility and Requirements
- This kit is compatible with Arduino and other compatible microcontrollers.
- A programming software for Arduino is required to use the sensors.
- The sensors can be used in home and industrial automation projects.
Limitations and Important Notes
- The sensors are not suitable for high-temperature applications.
- The Hall effect sensor module requires a magnetic field to operate.
- The PIR motion sensor can be influenced by non-human heat sources.
- The infrared sensor module may not detect transparent obstacles.
Troubleshooting
The PIR motion sensor does not detect movements.
Probable cause: The sensor might be too close to a heat source.
Solution: Move the sensor away from heat sources and recalibrate.
The Hall effect sensor module is not working.
Probable cause: The sensor might not be near a magnetic field.
Solution: Position a magnet near the sensor.
The infrared sensor module does not detect obstacles.
Probable cause: The obstacle might be transparent to IR.
Solution: Test with an opaque obstacle.
The sensors do not respond to the software.
Probable cause: The connections might be incorrect.
Solution: Check the connections and the programming code.
Use cases
Home security system
Objective: Detect motion and door openings.
What is needed: PIR motion sensor and Hall effect sensor module.
Steps: 1) Install the PIR motion sensor in a room. 2) Connect the Hall effect sensor module to the door. 3) Program the alarm system. 4) Test the alarm system.
Expected result: The alarm system detects movements and door openings.
Obstacle Avoidance System for Robots
Objective: Detect obstacles and modify the robot’s path.
What is needed: Infrared sensor module.
Steps: 1) Install the infrared sensor module on the robot. 2) Connect the infrared sensor module to the microcontroller. 3) Program the obstacle avoidance system. 4) Test the obstacle avoidance system.
Expected result: The robot avoids obstacles during movement.
Access Control System
Objective: Control access to a protected area.
What is needed: Hall effect sensor module.
Steps: 1) Install the Hall effect sensor module on the door. 2) Connect the Hall effect sensor module to the control system. 3) Program the control system. 4) Test the control system.
Expected result: The control system detects the opening of the door.
Garage security system
Objective: To detect movements and opening of the garage door.
What is needed: PIR motion sensor and Hall effect sensor module.
Steps: 1) Install the PIR motion sensor in the garage. 2) Connect the Hall effect sensor module to the garage door. 3) Program the alarm system. 4) Test the alarm system.
Expected result: The alarm system detects movements and opening of the garage door.
Office access control system
Objective: To control access to an office.
What is needed: Hall effect sensor module.
Steps: 1) Install the Hall effect sensor module at the office door. 2) Connect the Hall effect sensor module to the control system. 3) Program the control system. 4) Test the control system.
Expected result: The control system detects the opening of the office door.
Shop security system
Objective: Detect movements and door opening in the shop.
What is needed: PIR motion sensor and Hall effect sensor module.
Steps: 1) Install the PIR motion sensor in the shop. 2) Connect the Hall effect sensor module to the shop door. 3) Program the alarm system. 4) Test the alarm system.
Expected result: The alarm system detects movements and door opening in the shop.
Security system for apartment
Objective: Detect movements and door opening in the apartment.
What is needed: PIR motion sensor and Hall effect sensor module.
Steps: 1) Install the PIR motion sensor in the apartment. 2) Connect the Hall effect sensor module to the apartment door. 3) Program the alarm system. 4) Test the alarm system.
Expected result: The alarm system detects movements and the opening of the apartment door.
Home Security System
Objective: Detect movements and door openings in the house.
What’s needed: PIR motion sensor and Hall effect sensor module.
Steps: 1) Install the PIR motion sensor in the house. 2) Connect the Hall effect sensor module to the house doors. 3) Program the alarm system. 4) Test the alarm system.
Expected result: The alarm system detects movements and door openings in the house.
In the package
- Kit Hall Effect Reed Sensor Magnetic Switch + PIR Motion Sensor + Infrared Sensor Module pe
Complete the project
- Infrared PIR Motion Sensor HC-SR501 for Arduino: Improves the security of the alarm system.
Technical FAQs
The PIR motion sensor does not detect movements?
Check that the sensor is not too close to heat sources and recalibrate.
The Hall sensor module does not work?
Check that the sensor is near a magnetic field.
The infrared sensor module does not detect obstacles?
Check that the obstacle is not transparent to IR.
The sensors do not respond to the software?
Check the connections and programming code.





Reviews
There are no reviews yet.