HL-5300 AC 250V 3A Coil Spring Actuator Momentary 1NO 1NC Limit Switch

Description

HL-5300 AC 250V 3A Coil Spring Actuator Momentary 1NO 1NC Limit Switch
We have datasheets available for all components, should it not be present in the product download sheet, send us a message via the contact us form and we will publish it as soon as possible on our website.

Tutorial: How to use HL-5300 AC Coil Spring Actuator

The HL-5300 actuator is a useful device for controlling high voltage electrical circuits. It is ideal for home or industrial automation projects where managing the flow of current is necessary. This coil spring actuator is suitable for both beginners and intermediate makers looking to explore electrical safety in more complex projects.

What you need

• Arduino Uno or compatible
• Connection cable
• Connectors

Steps

1. Connect the actuator to the control circuit using the appropriate connectors.
2. Prepare the 1NO and 1NC contacts as required by the project.
3. Insert the connection between Arduino and actuator for the command.
4. Configure the sketch on Arduino to control the activation of the actuator.
5. Check the operating voltage of the circuit (250V AC) safely.
6. Test the device by pressing the limit switch to test the 1NO and 1NC contacts.

Example code

void setup() {
pinMode(OUTPUT_PIN, OUTPUT);
}

void loop() {
digitalWrite(OUTPUT_PIN, HIGH); // Attiva l'attuatore
delay(500);
digitalWrite(OUTPUT_PIN, LOW); // Disattiva l'attuatore
delay(500);
}

Mini project

Create a home security system that triggers an alarm when a door or window is open. Connect the limit switch actuator to a presence sensor.

Common mistakes

• Use voltages higher than specified (check the datasheet).
• Connect the actuator without electrical protections.
• Do not configure the 1NO and 1NC contacts correctly.
• Omit the device test before using it in an operational circuit.

Recommended accessories

• Arduino Uno R3
• RC Protection Module for Arduino
• PIR Presence Sensors
• AC Relay

Frequently asked questions

Q: Can this actuator be used with lower voltages?
Yes, but check compatibility on the datasheet.

Q: Can I control it directly from a microcontroller like Arduino?
No, a relay or isolation module must be used between the Arduino and the actuator.