Description
Technical Description
The ACS712 Current Sensor Module 20A Ammeter Kit is an electronic component designed to measure electrical current in circuits. The ACS712 module integrates an integrated current sensor into a single chip, allowing for accurate measurement of both direct and alternating current. The kit also includes a DS1302 module for clock and calendar, useful for applications requiring time logging.
The ACS712 module can be easily integrated into Arduino or other microcontroller projects to monitor and control current flow. The included jumper cables facilitate connections between components and the microcontroller.
The DS1302 module provides a real-time clock and calendar, with built-in memory for data retention. It is useful for applications that need to keep track of time and dates.
Key Specifications
| Parameter | Value |
| Model | ACS712 Current Sensor Module 20A ammeter |
| Quantity | 1 |
| Supply Voltage | N/D (see manufacturer’s datasheet) |
| Interface | I2C, SPI |
| Dimensions | N/D (see manufacturer’s datasheet) |
| Package | N/D (see manufacturer’s datasheet) |
| Model | DS1302 Real Time Clock Module with Memory and Battery RTC |
| Quantity | 1 |
| Supply Voltage | N/D (see manufacturer’s datasheet) |
| Interface | I2C |
| Dimensions | N/D (see manufacturer’s datasheet) |
| Container | N/D (see manufacturer’s datasheet) |
| Jumper Wires | 40 Jumper Wires 20cm Male-Female |
Installation and Usage
- Connect the ACS712 module to the Arduino microcontroller using jumper wires.
- Configure the ACS712 module for current measurement.
- Power the ACS712 module with the appropriate supply voltage.
- Connect the DS1302 module to the Arduino microcontroller using jumper wires.
- Configure the DS1302 module for real-time clock and calendar.
Compatibility and Requirements
- The ACS712 module is compatible with Arduino and other microcontroller systems that support I2C and SPI interfaces.
- The DS1302 module is compatible with Arduino and other microcontroller systems that support the I2C interface.
- To use the kit, an Arduino microcontroller or a compatible microcontroller system is required.
Limitations and Important Notes
- The ACS712 module cannot measure currents higher than 20A.
- The DS1302 module cannot store large amounts of data.
- Ensure the correct supply voltage is used to avoid damage to components.
- The kit does not include an Arduino microcontroller.
Troubleshooting
The ACS712 module does not detect current.
Probable cause: Incorrect connections or interruptions.
Solution: Check and repeat jumper cable connections.
The DS1302 module does not synchronize with the clock.
Probable cause: Incorrect clock configuration.
Solution: Repeat clock configuration.
The ACS712 module does not respond.
Probable cause: Insufficient supply voltage.
Solution: Check and repeat module power supply.
The DS1302 module does not store data.
Probable cause: Memory full.
Solution: Clear the memory or increase storage capacity.
Use cases
Motors current sensor for a robot
Objective: Monitor motor current to control power.
Required: ACS712 Current Sensor Module 20A ammeter.
Steps: 1) Connect the ACS712 module to the motor circuit. 2) Configure the module for current measurement. 3) Monitor the current using an Arduino software.
Expected result: The robot can be controlled based on motor current.
Solar power plant energy counter
Objective: Monitor energy production.
Required: ACS712 Current Sensor Module 20A ammeter.
Steps: 1) Connect the ACS712 module to the output circuit of the solar system. 2) Configure the module for current measurement. 3) Monitor the current using an Arduino software.
Expected result: Energy production can be monitored and recorded.
Load monitoring system for an UPS
Objective: Monitor the current of the load.
What is needed: ACS712 Current Sensor Module 20A ammeter.
Steps: 1) Connect the ACS712 module to the output circuit of the UPS. 2) Configure the module for current measurement. 3) Monitor the current using an Arduino software.
Expected result: The load can be monitored and managed.
Load monitoring system for a computer
Objective: Monitor the current of the computer.
What is needed: ACS712 Current Sensor Module 20A ammeter.
Steps: 1) Connect the ACS712 module to the computer’s power circuit. 2) Configure the module for current measurement. 3) Monitor the current using an Arduino software.
Expected result: The computer’s current can be monitored and managed.
Load monitoring system for an electrical installation
Objective: Monitor the installation’s current.
What’s needed: ACS712 Current Sensor Module 20A ammeter.
Steps: 1) Connect the ACS712 module to the installation’s output circuit. 2) Configure the module for current measurement. 3) Monitor the current using an Arduino software.
Expected result: The installation’s current can be monitored and managed.
Load monitoring system for an lighting installation
Objective: Monitor the lighting’s current.
What is needed: ACS712 Current Sensor Module 20A ammeter.
Steps: 1) Connect the ACS712 module to the lighting circuit output. 2) Configure the module for current measurement. 3) Monitor the current using an Arduino software.
Expected result: The lighting current can be monitored and managed.
Load monitoring system for a refrigeration unit
Objective: Monitor the current of the refrigerator.
What is needed: ACS712 Current Sensor Module 20A ammeter.
Steps: 1) Connect the ACS712 module to the refrigerator circuit output. 2) Configure the module for current measurement. 3) Monitor the current using an Arduino software.
Expected result: The refrigerator current can be monitored and managed.
Load monitoring system for an audio system
Objective: Monitor the audio system current.
What’s needed: ACS712 Current Sensor Module 20A ammeter.
Steps: 1) Connect the ACS712 module to the audio system output circuit. 2) Configure the module for current measurement. 3) Monitor the current using an Arduino software.
Expected result: The audio system current can be monitored and managed.
In the package
- 1 Kit ACS712 Current Sensor Module 20A ammeter + 40 Jumper Cables 20cm Male-Female + DS1302 Clock and Calendar Module with Memory and RTC Battery Real Time Clock
Complete the project
- 40 Jumper Cables 20cm Male-Male for Arduino: To connect the ACS712 module to a more complex circuit.
Technical FAQs
Can the ACS712 module measure currents above 20A?
No, the ACS712 module is designed to measure currents up to 20A.
Can the DS1302 module store large amounts of data?
No, the DS1302 module cannot store large amounts of data.
Which connectors are included in the kit?
The kit includes 40 jumper cables 20cm Male-Female.
What are the power supply voltage limits of the ACS712 module?
The power supply voltage limits are N/D (see manufacturer’s datasheet).





Reviews
There are no reviews yet.