2×18 Female Pin Header Step 2.54mm, Long Pins for PCB

Description

What it is

Product ARD009862 is a double-row female pin header connector consisting of two rows of 18 points each, with a spacing of 2.54mm between the points and long pins designed to be inserted into a PCB.

Features

• 2×18 pin header female
• Pitch between points: 2.54mm
• Long pins for PCB

What it is for

Ideally used to connect components and 3D prints in electronic projects, this female header is suitable for connecting a PCB to a breadboard or another header. It is useful for both beginners and intermediates in electronics.

Tutorial: How to use 2×18 pin header Female pitch 2.54mm

This female header is ideal for connecting your PCB to a breadboard or another header. Useful for beginners and intermediates in electronics.

What you need

• Female header 2×18 pin
• Breadboard
• Connector for PCB
• Soldering iron

Steps

1. Check the datasheet for your header specifications.
2. Prepare the breadboard and assign the pins to avoid conflicts.
3. Solder the female header to the breadboard.
4. Check the stability of the contacts.
5. Solder the female header to your PCB.
6. Verify the connectivity and functionality of the circuit.
7. If necessary, adjust the position of the pins to improve stability.
8. Try connecting an external component to test the connectivity.

Mini project

Build a simple lighting circuit based on a button and an LED.

Common mistakes

• Solder the pins too strongly or weakly.
• Connect the pins incorrectly on the breadboard.
• Omit checking the stability of the contacts.
• Do not test the circuit before pairing the components.

Recommended accessories

• Breadboard
• Malfunctioning pins
• Button
• LED

Frequently asked questions

Can I use this header with components of a different pitch?
Check the datasheet to see if your header pitch is compatible with other components.

How can I check the contact stability?
Gently place a component on the header and check if it moves.

Can I use this header with an Arduino?
Yes, but make sure the header pitch is compatible with the Arduino.

How long does it take to mount the header?
The mounting time depends on your skill level, but it should take about 10-15 minutes.