2 x SMA-J 1.5 Male Connectors for RG316/ RG174 Cable

Description

2 pieces SMA-J 1.5 male for RG316 RG174 cable

Tutorial: How to use the 2 pieces SMA-J 1.5 male for RG316 RG174 cable

These connectors are ideal for connecting antenna cables to devices such as receivers or transmitters. Useful for makers and professionals in radio.

What you need

• 2 pieces SMA-J 1.5 male
• RG316 or RG174 cable
• Tool for cutting and breaking cables
• Tool for gauge (check the datasheet)

Steps

1. Check the datasheet for the specifications of the RG316 or RG174 cable.
2. Cut the cable with a clean cut using cable cutters.
3. Break the cable in half to get two pieces.
4. Prepare the two SMA-J 1.5 male pieces with an electronics brush.
5. Connect the cable to a piece of SMA-J using the gauge.
6. Check the connection with a multimeter.
7. Repeat for the other SMA-J piece and cable.
8. Verify the connection with a receiver or transmitter.

Mini project

Build a radio signal reception system. Connect the connectors to a receiver and test the reception of a signal.

Common mistakes

• Do not use scissors not intended for cables.
• Do not use an incorrect wire gauge.
• Do not check the connection with a multimeter.
• Do not test the connection with a receiver or transmitter.

Recommended accessories

• Cable cutter
• Electronic brush
• Multimeter
• Receiver or transmitter

Frequently asked questions

How can I check the length of the cable?
Check the datasheet or measure with a cable meter.

Can I use these connectors with cables other than RG316 or RG174?
Check the datasheet to see if the connectors are compatible with other types of cable.

I lost a connector, can I use a different connector?
Check the datasheet to see if the connectors are interchangeable.