SMAJ / PRSMAJW 90° Bent Internal Pin Connector

Description

SMAJ / PRSMAJW 90 Degree Bent Pin Connector

Tutorial: How to Use SMAJ / PRSMAJW 90 Degree Bent Pin Connector

This connector is ideal for safely and flexibly connecting cables to antennas or other components. Useful for projects requiring angular connections.

What you need

• SMAJ / PRSMAJW 90 Degree Bent Pin Connector
• Antenna cable or other cable
• Tool for cutting and stripping cables
• Tool for pushing contacts

Steps

1. Check the datasheet for the dimensions and specifications of the connector.
2. Cut the cable to a length sufficient for your project.
3. Deburr the cable contacts with a wire stripper.
4. Insert the deburred contacts into the SMAJ / PRSMAJW connector.
5. Gently push the contacts until you hear a click.
6. Check the connection by pushing the contacts with a needle or pin.
7. If necessary, apply a little lubricant to facilitate the connection.
8. Check the connection by inspecting the contact and insulation.

Mini project

Build a simple radio receiver using a radio module, an Arduino microcontroller, and an LCD display. Connect the radio module to the SMAJ / PRSMAJW connector and mount everything on a printed circuit board.

Common mistakes

• Do not crimp the wire contacts too forcefully, as this can damage them.
• Do not use corrosive lubricants or those not specifically designed for electronic connectors.
• Do not forget to check the connection after establishing it.
• Always check the connector specifications before use.

Recommended accessories

• Wire cutter
• Needle nose pliers
• Electronic connector lubricant
• Arduino microcontroller

Frequently asked questions

How can I verify the correct connection?
Check the contact and insulation of the wires with a multimeter or by visualizing the connection on a display.

Can I use this connector with wires of different widths?
Check the datasheet for connector specifications before use.

Which lubricant can I use?
Use only lubricants specifically for electronic connectors.