1310 50 * 50 * 1.1mm ITO Conductive Glass 10ohm

Description

What is ITO (Indium Tin Oxide) conductive glass? ITO is a semiconductor material used in various electronic projects for its ability to conduct electricity while maintaining the physical properties of glass. This particular piece of ITO conductive glass is suitable for touch-sensitive panels or heating systems.

Features:
– Type: ITO conductive glass
– Dimensions: 50 x 50mm
– Thickness: 1.1mm
– Resistance: 10 ohm

What is it used for? ITO conductive glass is ideal for touch-sensitive panel or heating system projects. Suitable for both beginners and experts, especially when working with Arduino or ESP32.

Tutorial: How to use 50×50 ITO conductive glass
– Suitable for touch-sensitive panel or heating system projects.
– Useful for beginners and intermediates.

Steps:
– Verify the specifications and dimensions in the datasheet.
– Connect the ITO conductive glass to the A0 pin of Arduino.
– Connect the VCC and GND of Arduino to the appropriate connectors.
– Add a 10kΩ resistor between GND and the A0 pin.
– Upload the example code to read the A0 pin value.
– Test the glass with a touch to verify the touch function.
– Remove the resistor and connect GND directly to the A0 pin to measure heating.
– Verify that the glass functions correctly.

Example code:
“`int sensorPin = A0;
int sensorValue = 0;
void setup() {
Serial.begin(9600);
}
void loop() {
sensorValue = analogRead(sensorPin);
Serial.println(sensorValue);
delay(1000);
}“`

Mini-project: Create a touch-sensitive panel using the ITO glass and an LCD display to show touch values.

Common errors:
– Do not read the A0 pin without a resistor.
– Do not connect GND directly to the A0 pin without a resistor.
– Do not test the glass with a touch.
– Do not use a resistor with a different value than 10kΩ.

Recommended accessories:
– LCD display
– 10kΩ resistor
– Test pin