Conductive Transparent Film 100*200 (ITO-PET) 50ohm

Description

What is it The conductive transparent ITO-PET film is a flexible material composed of an indium tin oxide (ITO) thin film coated on a polyethylene terephthalate (PET) substrate. ITO is a transparent electric conductor that allows the creation of electrical circuits on transparent surfaces. Features Dimensions: 100 x 200 mm Resistance: 50 ohm Material: ITO-PET For what is it used The conductive transparent ITO-PET film is ideal for touch screen, light sensors, and human-computer interface projects. It can be used in Arduino projects to create virtual buttons, pressure sensors, or other interactive components. It is a versatile and easy-to-work-with material suitable for both beginners and experienced users. Tutorial: How to use Conductive Transparent Film ITO-PET is ideal for human-computer interface or touch sensor projects. Useful for beginners and intermediates. What do you need Scissors Tweezers Antiseptic spray Steps 1. Check the film’s characteristics in the datasheet. 2. Clean the surface where you will mount the film. 3. Apply antiseptic spray to improve adhesion. 4. Cut the film with scissors. 5. Place the film on a ground-connected surface. 6. Connect a 10kΩ resistor between the input pin and VCC. 7. Read the analog value with an Arduino. 8. Test the film as a touch sensor. Mini-project Create a virtual button using the conductive transparent ITO-PET film. Common errors Do not dry the film after using the spray. Do not cut the film too tightly. Do not connect directly to VCC without a resistor. Do not use a resistor with too low resistance. Recommended accessories Arduino 10kΩ resistor Antiseptic spray Tweezers