Brushless Drone Motor PM 1306 3000KV CW

Description

• KV: 3000KV (RPM per volt).
• Rotation: CW (Standard shaft threading, clockwise).
• Power Supply: Typically supports 2S-3S LiPo batteries (some improved variants also support 4S).
• Dimensions: Class 1306 motor (stator), often with an external rotor of 18mm.
• Recommended Propellers: Suitable for propellers from 3 to 3.5 inches (e.g., 3030, 3035).
• Performance: Indicated maximum thrust around 200-300g (depending on the 2S/3S battery).
• Weight: Very light, typically around 14g.
• Shaft Thread: Standard M5 for propellers. 
  Falcon.com.kw +4

Tutorial: How to use Brushless PM 1306 3000KV CW Motors

The brushless PM 1306 3000KV CW motor is ideal for small and medium drones. This motor is designed to provide high thrust with minimal weight, making it perfect for both beginner and experienced pilots.

What you need

• LiPo Battery 2S-3S
• ESC Controller
• Propellers from 3 to 3.5 inches
• Drone Frame
• Connections for power and control

Steps

1. Install the PM 1306 motor on the drone structure using the standard M5 thread.
2. Connect the motor to the ESC (Electronic Speed Controller) via the appropriate connectors.
3. Connect the ESC to the drone’s LiPo battery.
4. Install a 3 to 3.5 inch propeller on the PM 1306 motor.
5. Configure the ESC controller following the manufacturer’s instructions.
6. Test the motor with the drone in a horizontal position to verify its operation.
7. If necessary, adjust the ESC controller configuration to optimize motor performance.
8. Glue the motor and the drone structure to ensure stability during flight.

Mini project

Build a small acrobatic drone with the PM 1306 motor and a lightweight drone frame. Test its performance in an open and safe environment.

Common mistakes

• Do not verify the compatibility of the motor with the battery.
• Do not properly configure the ESC controller.
• Use propellers that are too large or too small for the motor.
• Do not test the motor before the actual flight.

Recommended accessories

• Battery LiPo 3S 1300mAh
• ESC Controller 20A
• Drone frame micro/micro+ 130mm
• Set of propellers from 3 to 3.5 inches

Frequently asked questions

What is the difference between CW and CCW?
CW means clockwise rotation, while CCW means counterclockwise rotation. Make sure to install the correct motor for your drone’s configuration.

How much thrust can it provide?
The maximum thrust is around 200-300g, depending on the battery used (2S or 3S).

Can I use it with 4S batteries?
Check the motor’s datasheet to confirm compatibility with 4S batteries.