2 Pieces 10P A-A 100MM SH 1.0 Connector JST Cable 28AWG

Description

Tutorial: How to Use 10P A-A 100MM SH 1.0 Cables

These cables are perfect for connecting two SH1.0 JST connectors in electronic and maker projects. Ideal for beginners and intermediates.

What you need

• 2 pieces of 10P A-A 100MM SH 1.0 cable
• SH1.0 JST Connector
• Cutting Tools
• Stripping Tools

Steps

1. 1. Check the cable specification (28AWG) on the datasheet.
2. 2. Cut the cables to 100mm using a pair of scissors.
3. 3. Strip the wires with a wire stripper.
4. 4. Assemble the wires with the SH1.0 JST connector.
5. 5. Repeat the same procedure for the other cable.
6. 6. Connect the two cables to their respective SH1.0 JST connectors.
7. 7. Check the connection and assembly.
8. 8. Try powering the circuit.

Mini project

Build a simple lighting circuit based on a button and an LED.

Common mistakes

• Do not use unsuitable scissors to cut the cables.
• Do not assemble the wires correctly in the connector.
• Do not check the connection before powering the circuit.
• Do not use wires of different sizes than the connector.

Recommended accessories

• SH1.0 JST Connector
• Button
• LED
• Resistor

Frequently asked questions

Are the wires correct for SH1.0 JST connectors?
Yes, these wires are compatible with SH1.0 JST connectors.

What tools are needed for stripping?
You need a wire stripper.

Can I use these wires for different connectors?
Check the datasheet for compatibility with other connectors.

How long does it take to mount the wires?
Mounting should take about 10-15 minutes.