2.54mm Green Jumper Shunt Kit – 2000 Pieces

Description

What it is

The Jumper Shunt 2.54mm Kit is a set of green plastic shunt jumpers that allow for temporary or permanent connections between the pins of printed circuit boards and Arduino boards.

Features

• Size: 2.54mm (check the datasheet)
• Type: shunt jumpers
• External material: green plastic
• Quantity: 2000 pieces

What it is for

Shunt jumpers are useful for easily connecting and disconnecting electronic circuits. Ideal for beginner and intermediate makers working on electronics projects, they allow testing of component functionalities without having to make numerous physical connections.

Tutorial: How to use Jumper Shunt 2.54mm Kit

The Jumper Shunt 2.54mm Kit is a set of shunt jumpers useful for temporary or permanent connections between the pins of printed circuit boards and Arduino boards. Ideal for beginner and intermediate makers working on electronics projects.

What you need

• Jumper Shunt 2.54mm Kit
• Prototype table top or motherboard printing
• Pliers

Steps

1. Open the kit and select the necessary jumpers.
2. Place the jumper between two connection points on the table top print or motherboard, pressing lightly to ensure the stability of the connection.
3. Check that the jumper is positioned correctly and does not touch other pins.
4. If necessary, use pliers to move or remove jumpers from the circuit.
5. Repeat the previous steps for each connection required in your project.

Mini project

Create a simple lighting circuit with an LED using the Jumper Shunt 2.54mm kit and an Arduino board, connecting the LED to various pins to test the features.

Common mistakes

• Incorrect pin connection.
• Using a jumper that is too large or too small for the circuit.
• Dirtying the jumpers during handling, compromising the electricity.
• Do not power the circuit before verifying the connections correctly.

Recommended accessories

• Prototype desktop printing
• LEDs in various colors
• 220 ohm resistors
• Arduino Uno or compatible board

Frequently asked questions

What is the difference between a jumper and a solder joint?
A jumper (shunt) is temporary, while a solder joint is permanent.

Can I use these jumpers on any board?
Yes, provided that the holes are the same diameter of 2.54mm.