Sale!

0.8mm Active Solder Wire – 100g

Original price was: 8,43 €.Current price is: 6,11 €. Excluding VAT

Soldering wire 0.8 MM, soldering wire filament 100 g active

Available on back-order

Domande su questo prodotto? Scrivi a Lana su WhatsApp

🎬 The product on video

Description

What it is

The 0.8mm active solder wire lead 100g is a fundamental element for the creation and repair of electronic projects, including those based on Arduino.

Features

  • Solder Wire Lead: 0.8mm
  • Net Weight: 100g active

What it is for

This solder wire lead is used to create perfect solder joints on printed circuit boards and electronic components. It is particularly useful for projects that require precision soldering, such as the creation of simple circuits with LEDs and resistors.

Tutorial: How to Use 0.8mm Solder Wire, 100g

Solder wire lead is essential for any electronic project that requires soldering. This guide shows you how to use the 0.8mm solder wire lead 100g to create perfect solder joints on printed circuit boards.

What you need

  • Soldering Iron
  • Pliers
  • Scrap Bag

Steps

  1. Step 1: Prepare the soldering iron. Check the datasheet for the ideal temperature for your solder wire lead.
  2. Step 2: Cut an adequate length of solder wire using pliers.
  3. Step 3: Position the electronic component on the printed circuit board, ensuring it is well aligned.
  4. Step 4: Pass the tip of the soldering iron through the solder ring to start the melting process.
  5. Step 5: When the solder has melted, add a bit of solder wire from the opposite side of the connection.
  6. Step 6: Wait for the solder to fully solidify before removing the soldering iron and pliers.
  7. Step 7: Check that the solder joint is solid and crack-free. If necessary, repeat the previous steps to improve the solder joint.

Mini project

Create a simple printed circuit board with an LED and resistors and solder all connections using the 0.8mm solder wire. This project will help you practice soldering techniques.

Common mistakes

  • Using too high or too low a temperature in the soldering iron.
  • Adding too much or too little solder wire.
  • Do not wait for the solder to fully solidify before removing the tool.

Recommended accessories

  • Soldering iron (SKU: ARD001234)
  • Electronic pliers (SKU: ARD001256)
  • Component bag (SKU: ARD001278)

Frequently asked questions

What is the ideal temperature for soldering with this solder wire?
Check the product datasheet. The temperature varies depending on the quality of the solder wire.

How can I clean the circuit after soldering?
Use a soldering brush and solvent to remove any leftover solder or impurities.

Reviews

There are no reviews yet.

Be the first to review “0.8mm Active Solder Wire – 100g”

Your email address will not be published. Required fields are marked *