Description
Technical Description
The USB to ESP8266 WIFI Microcontroller Module Adapter Serial CH340, ESP-01S ESP8266 from Serial Port to WIFI Remote Module wireless low power compatible with Arduino and ESP-01 ESP8266 Wireless Module – Wifi compatible with Arduino is a set of components for developing wireless communication projects based on ESP8266. This kit allows creating Wi-Fi connectivity in various devices and prototypes, providing a USB serial module, an ESP-01S module, and an ESP-01 module. Each component is designed to facilitate programming and data communication through a Wi-Fi connection.
The CH340 USB adapter module allows the ESP8266 module to connect to a computer via USB, providing serial communication. The ESP-01S and ESP-01 are small Wi-Fi modules that can be integrated into small-sized projects for wireless data communication.
This kit is particularly useful for developers and hobbyists who want to explore the programming and wireless data communication capabilities of the ESP8266 without having to purchase the components individually.
Key Specifications
| Parameter | Value |
| USB to ESP8266 Model | CH340 |
| ESP8266 Module Model | ESP-01S |
| ESP8266 Module Model | ESP-01 |
| Quantity | 3 pieces |
| Interface | USB |
| Interface | Serial Port |
| Dimensions | N/A (see manufacturer’s technical sheet) |
| Container | N/A (see manufacturer’s technical sheet) |
Installation and Usage
- Connect the USB CH340 module to the computer via the USB port.
- Connect the ESP-01S module to the USB CH340 module through the serial port.
- Connect the ESP-01 module to the USB CH340 module through the serial port.
- Configure the development environment for serial communication.
- Perform a simple data communication test through the serial port.
Compatibility and Requirements
- This kit is compatible with a wide range of systems and platforms, including Arduino, Raspberry Pi, and other microcontrollers.
- A serial communication software is required to manage the connection between the USB module and the computer.
- An integrated development environment like Arduino IDE is required for programming the ESP8266 module.
Limitations and Important Notes
- The kit does not include software development tools such as the Arduino IDE.
- Be careful with the proper power supply of the modules to avoid damage.
- Make sure the USB CH340 module is correctly recognized by the computer’s operating system.
Troubleshooting
The ESP-01 module does not respond.
Probable cause: Unstable serial connection.
Solution: Check the serial connections and recalibrate the serial communication.
The USB module is not recognized.
Probable cause: USB drivers not installed.
Solution: Install the USB CH340 drivers for the operating system.
Data communication error.
Probable cause: Incorrect serial configuration.
Solution: Recalibrate the serial configuration in the development software.
ESP-01S module does not respond.
Probable cause: Insufficient power supply.
Solution: Check the module’s power supply and increase the voltage if necessary.
Use cases
Remote Temperature Sensor
Objective: Monitor the temperature in a remote environment.
What’s needed: ESP-01S module with temperature sensor.
Steps: 1) Connect the temperature sensor to the ESP-01S module. 2) Configure the module for data transmission. 3) Install a remote monitoring application.
Expected result: The temperature is regularly sent to the monitoring server.
Remote Light Control
Objective: Control home lights remotely.
What’s needed: ESP-01 module with relay.
Steps: 1) Connect the relay to the ESP-01 module. 2) Configure the module to receive commands. 3) Install a remote control application.
Expected result: Lights can be controlled from a remote application.
Remote Motion Detection
Objective: Detect motion in a specific area.
What’s needed: ESP-01S module with motion sensor.
Steps: 1) Connect the motion sensor to the ESP-01S module. 2) Configure the module for data transmission. 3) Install a remote monitoring application.
Expected result: Motion is detected and sent regularly to the monitoring server.
Remote thermostat control
Objective: Adjust the home thermostat remotely.
What you need: ESP-01 module with thermostat.
Steps: 1) Connect the thermostat to the ESP-01 module. 2) Configure the module to receive commands. 3) Install a remote control application.
Expected result: The thermostat can be adjusted from a remote application.
Remote humidity monitoring
Objective: Monitor humidity in an environment.
What you need: ESP-01S module with humidity sensor.
Steps: 1) Connect the humidity sensor to the ESP-01S module. 2) Configure the module for data transmission. 3) Install a remote monitoring application.
Expected result: Humidity is regularly sent to the monitoring server.
Remote door control
Objective: Control access to home doors.
What is needed: ESP-01 module with access system.
Steps: 1) Connect the access system to the ESP-01 module. 2) Configure the module to receive commands. 3) Install a remote control application.
Expected result: Door access can be controlled from a remote application.
Remote atmospheric pressure monitoring
Objective: Monitor atmospheric pressure.
What is needed: ESP-01S module with pressure sensor.
Steps: 1) Connect the pressure sensor to the ESP-01S module. 2) Configure the module for data transmission. 3) Install a remote monitoring application.
Expected result: The atmospheric pressure is regularly sent to the monitoring server.
Remote control of external lights
Objective: Control external lights remotely.
What’s needed: ESP-01 module with relay.
Steps: 1) Connect the relay to the ESP-01 module. 2) Configure the module to receive commands. 3) Install a remote control application.
Expected result: External lights can be controlled from a remote application.
In the package
- 3 pieces
Complete the project
- ESP8266 ESP-12 Remote Serial Port WIFI Transceiver Wireless Module: Used to connect the ESP8266 module to a computer via USB port.
- ESP8266 ESP-05 Remote Serial Port WIFI Transceiver Wireless ModuleUsed to connect the ESP8266 module to a computer via a serial port.
- WeMOS R3 ATmega328P WiFi ESP8266 USB-TTL Arduino NodeMCU 32Mb memoryUsed to develop wireless data communication projects with ESP8266.
- ESP-03 ESP8266 Serial WIFIUsed to connect the ESP8266 module to a computer via a serial port.
- ESP8266 Module WiFi Shield Serial Web Server with ESP-13Used to develop wireless data communication projects with ESP8266.
Technical FAQs
The USB module is not recognized?
Check the installation of the USB CH340 driver for the operating system.
The ESP-01 module does not respond?
Check the serial connections and recalibrate the serial communication.
What software tools are required?
A software development environment like Arduino IDE is required for programming the ESP8266 module.
What are the limitations of this kit?
The kit does not include software development tools such as the Arduino IDE and requires careful configuration for serial communication.




Reviews
There are no reviews yet.