Description
Technical Description
The TP4056 Charging Module Dedicated for Lithium Batteries, 4-slot AA Battery Holder and Breadboard Power Supply Module for Arduino Compatible 5V – 3.3V is a set of components useful for managing power supply and battery charging in electronic projects. The TP4056 module provides a safe and efficient battery charging solution for lithium batteries, while the AA battery holder offers practical support for installing and managing four AA batteries. The breadboard power supply module is designed to provide a stable voltage of 5V or 3.3V, essential for powering circuits and sensitive devices.
The TP4056 module is equipped with built-in protections against overcharge, short circuit, and overvoltage, ensuring safety during the charging of lithium batteries. The AA battery holder is equipped with safety slots to ensure a secure and stable battery mounting. The breadboard power supply module is designed to be easily integrated into electronic circuits and prototypes, providing constant and adjustable power.
This kit is suitable for projects requiring a reliable power supply and charging solution, suitable for both laboratory use and practical applications.
Key Specifications
| Parameter | Value |
| Model | Kit TP4056 Dedicated Lithium Battery Charger Module, 4-slot AA Battery Holder and Breadboard Power Supply Module Compatible with Arduino 5V – 3.3V |
| Quantity | 1 |
| Interface | N/D (see manufacturer’s datasheet) |
| Dimensions | N/D (see manufacturer’s technical sheet) |
| Container | 4 AA slots |
| Power Supply | N/D (see manufacturer’s technical sheet) |
Installation and Usage
- Check the compatibility of AA batteries with the container slots.
- Connect the TP4056 module to the charging circuit following the manufacturer’s instructions.
- Connect the breadboard power supply module to the circuit’s power pins.
- Verify the circuit’s power supply with a multimeter.
- Perform a lithium battery charging test.
Compatibility and Requirements
- The TP4056 module is compatible with lithium batteries and can be used with Arduino systems.
- The AA battery container is designed for standard AA batteries.
- The breadboard power supply module is compatible with Arduino systems and other electronic circuits.
Limitations and Important Notes
- The TP4056 module is not designed for lithium polymer batteries.
- The AA battery holder is not designed for batteries of other sizes.
- The breadboard power supply module does not provide power at voltages higher than 5V and 3.3V.
- Always use AA batteries to avoid safety issues.
Troubleshooting
The TP4056 module does not charge the battery.
Probable cause: Interrupted internal or external connections.
Solution: Check electrical connections and replace any damaged components.
The breadboard power supply module does not provide power.
Probable cause: Interrupted internal or external connections.
Solution: Check electrical connections and replace any damaged components.
The AA batteries do not hold a charge.
Probable cause: Low quality or damaged batteries.
Solution: Replace the batteries with those.
The TP4056 module overheats during charging.
Cause: Battery stuck in overcharge state.
Solution: Check the safety protections of the module and replace the battery if necessary.
Use cases
Home alarm detector
Objective: Create a home alarm system powered by AA batteries.
What you need: TP4056 Dedicated Battery Charging Module Kit, 4-slot AA battery holder, and Breadboard Compatible 5V – 3.3V Power Supply Module
Steps: 1) Install the power supply module for breadboard. 2) Connect the alarm sensor to the power supply module. 3) Verify the power supply of the sensor. 4) Connect the TP4056 module to the charging circuit.
Expected result: A home alarm system powered by AA batteries and automatically recharged.
Portable lighting project
Objective: Create a portable lighting project powered by AA batteries.
What’s needed: TP4056 Charging Module Kit for Lithium Batteries, 4-slot AA battery holder, and Breadboard Compatible Power Supply Module 5V – 3.3V
Steps: 1) Install the breadboard power supply module. 2) Connect the lighting circuit to the power supply module. 3) Verify the lighting circuit power supply. 4) Connect the TP4056 module to the charging circuit.
Expected result: Portable lighting project powered by AA batteries and automatically recharged.
Home Automation Project
Objective: Create a home automation system powered by AA batteries.
What’s needed: TP4056 Charging Module Kit for Lithium Batteries, 4-slot AA battery holder, and Breadboard Compatible Power Supply Module 5V – 3.3V
Steps: 1) Install the power supply module for the breadboard. 2) Connect the automation circuit to the power supply module. 3) Verify the power supply of the automation circuit. 4) Connect the TP4056 module to the charging circuit.
Expected result: A home automation system powered by AA batteries and automatically recharged.
Prototype project
Objective: Create a prototype system powered by AA batteries.
What’s needed: TP4056 Dedicated Battery Charger Module Kit, 4-slot AA battery holder, and Breadboard Compatible Power Supply Module 5V – 3.3V
Steps: 1) Install the power supply module for the breadboard. 2) Connect the prototype circuit to the power supply module. 3) Verify the power supply of the prototype circuit. 4) Connect the TP4056 module to the charging circuit.
Expected Result: Battery-powered AA battery system with automatic recharge capability.
Electronic Test Project
Objective: Create an electronic test system powered by AA batteries.
What’s needed: TP4056 Charging Module Kit, dedicated Lithium battery charger, 4-slot AA battery holder, and Breadboard Arduino Compatible Power Supply Module 5V – 3.3V
Steps: 1) Install the breadboard power supply module. 2) Connect the test circuit to the power supply module. 3) Verify the test circuit power supply. 4) Connect the TP4056 module to the recharge circuit.
Expected Result: AA battery-powered electronic test system with automatic recharge capability.
Electronic Maintenance Project
Objective: Create an electronic maintenance system powered by AA batteries.
What’s needed: TP4056 Charging Module Kit for Lithium Batteries, 4-slot AA battery holder, and Breadboard Compatible Power Supply Module 5V – 3.3V
Steps: 1) Install the power supply module for breadboard. 2) Connect the maintenance circuit to the power supply module. 3) Verify the maintenance circuit power supply. 4) Connect the TP4056 module to the charging circuit.
Expected result: An electronic maintenance system powered by AA batteries and automatically recharged.
Electronic hobby project
Objective: To create an electronic hobby system powered by AA batteries.
What’s needed: TP4056 Charging Module Kit for Lithium Batteries, 7-slot AA battery holder, and Breadboard Compatible Power Supply Module 5V – 3.3V
Steps: 1) Install the breadboard power supply module. 2) Connect the hobby circuit to the power supply module. 3) Verify the power supply to the hobby circuit. 4) Connect the TP4056 module to the charging circuit.
Expected result: A hobby electronic system powered by AA batteries and automatically recharged.
Electronic Lab Project
Objective: To create an electronic lab system powered by AA batteries.
What you need: TP4056 Dedicated Battery Charger Module Kit, 4-slot AA battery holder, and Breadboard Compatible Power Supply Module 5V – 3.3V
Steps: 1) Install the breadboard power supply module. 2) Connect the lab circuit to the power supply module. 3) Verify the power supply to the lab circuit. 4) Connect the TP4056 module to the charging circuit.
Expected Result: Battery-powered electronic lab system that automatically recharges using AA batteries.
In the package
- 1 piece
Complete the project
- 1 slot AA battery holder: The kit includes a breadboard power supply module, which can be integrated with other universal power supplies to increase the flexibility of the power system.
Technical FAQs
Can the TP4056 module charge lithium polymer batteries?
No, the TP4056 module is designed for lithium batteries and is not compatible with lithium polymer batteries.
Why does the breadboard power supply module not provide power?
Check electrical connections and replace any damaged components.
Which AA batteries are compatible with the holder?
The holder is designed for standard AA batteries.
The TP4056 module overheats during charging. How can I fix it?
Check the safety protections of the module and replace the battery if necessary.





Reviews
There are no reviews yet.