Mechanical Solder Wire Sn63/Pb37 0.2mm HX-T100 for BGA Repair

15,09 € Excluding VAT

MECHANICAL Solder Wire Tin 0.2 mm HX-T100 Sn63 / Pb37 for BGA Repair

Available on back-order

Domande su questo prodotto? Scrivi a Lana su WhatsApp

🎬 The product on video

Description

What it is

Mechanical solder wire Sn63/Pb37 with a diameter of 0.2 mm is a fundamental component for detailed electronic repairs such as reassembling BGA (Ball Grid Array).

Features

  • Type: Mechanical solder wire
  • Diameter: 0.2 mm
  • Tin/lead mixture: Sn63 / Pb37

What it is for

This solder wire is ideal for precise and accurate repairs on printed circuit boards, particularly for reassembling BGA components. It is mainly used by makers or technicians working with electronic components.

Tutorial: How to use MECHANICAL TIN SOLDER WIRE 0.2 mm HX-T100 Sn63 / Pb37

Mechanical solder wire tin is fundamental for detailed electronic repairs such as reassembling BGA (Ball Grid Array). This guide will help you use this essential tool if you are a maker or technician working with electronic components.

What you need

  • Soldering iron
  • Debris Removal Pliers
  • Cleaning Kit

Steps

  1. Heat your soldering iron to an appropriate temperature, generally between 300°C and 350°C.
  2. Clean the soldering area with a cleaning kit to remove any impurities or residues.
  3. Cut an appropriate length of mechanical solder wire Sn63 / Pb37.
  4. Apply the soldering iron to the connection area, being careful not to overheat surrounding components.
  5. Once the area has reached the right temperature, bring the solder wire close to the contact point and let it melt together.
  6. Once a solid connection is achieved, remove the soldering iron from the circuit.
  7. Check the quality of the solder joint using a magnifying glass to ensure there are no bridges or other imperfections.
  8. If necessary, repeat the previous steps until you achieve a perfect solder joint.

Mini project

BGA repair on a printed circuit board. Takes approximately 30 minutes.

Common mistakes

  • Overheating the soldering area, damaging surrounding components
  • Failing to clean adequately before soldering, resulting in weak or unsatisfactory connections
  • Using too much solder wire, creating excessive bridges between traces.
  • Removing the soldering iron too early, before the solder has fully solidified.

Recommended accessories

  • Adjustable temperature soldering iron
  • Printed circuit board cleaning kit
  • Debris tweezers for removing residues after soldering
  • Magnifying lens to check the quality of the solder joint.

Frequently asked questions

What is the diameter of the solder wire?
The diameter of the solder wire is 0.2 mm.

Can I use this wire for standard printed circuit board soldering?
Yes, you can use it for soldering on standard printed circuit boards, but make sure the soldering iron temperature is adequate.

What is the content of tin and lead in the wire?
The wire contains 63% tin (Sn) and 37% lead (Pb). Check the datasheet for additional specifications.

Reviews

There are no reviews yet.

Be the first to review “Mechanical Solder Wire Sn63/Pb37 0.2mm HX-T100 for BGA Repair”

Your email address will not be published. Required fields are marked *