LogiLink Smoke Detector 85 dB Range 20-40 m²

Description

What it is

The LogiLink smoke detector is a safety device designed to alert the user of the presence of smoke. This component emits an 85 dB audible alarm when smoke particles are detected, providing essential protection against fires.

Features

• Audible alarm: 85 dB
• Range: 20-40 m²

What it is for

The LogiLink smoke detector is ideal for home and industrial security. It can be used in rooms up to 40 square meters to protect human lives and property. Check the datasheet for further information on compatibility with email or SMS notification systems.

Tutorial: How to Use LogiLink Smoke Detector

The LogiLink smoke detector is an essential safety device for home and industrial use. This component alerts with a strong audible signal (85 dB) when smoke particles are detected, protecting human lives and property.

What you need

• LogiLink Smoke Detector
• Stable Power Supply

Steps

1. Install the detector in a high and central location in the area to be monitored.
2. Connect the device to the mains or battery as indicated in the product instructions.
3. Configure any sensitivity settings according to the specific needs of the environment.
4. Regularly check the effectiveness and functionality of the detector by performing periodic tests.
5. Install an alarm system connected to the detector for increased security (optional).

Mini project

Connect the smoke detector to a notification system via email or SMS in case of emergency.

Common mistakes

• Do not install the device too close to the floor.
• Do not regularly check the functionality of the detector.
• Omit the installation of an integrated alarm system.
• Use it without providing stable and sufficient power supply.

Recommended accessories

• SMS Notification System
• USB Power Supply
• Smoke Test Kit
• Wi-Fi Network

Frequently asked questions

How can I verify that the sensor is working?
Perform a periodic test following the instructions in the datasheet.

Can I connect it directly to an Arduino port?
No, it is designed for continuous electrical power. Check the datasheet for further information on alternative interfaces.