Green LED Beacon Light 12V 1.5W for Night Navigation

Description

The Green LED Beacon Light 12V 1.5W is an electronic component designed to enhance visibility during night navigation. This beacon can be integrated into various devices such as drones or aircraft models. Features Power Supply Voltage: 12V Power Consumption: 1.5W LED Colour: Green What it does The beacon can be used to create a night navigation signal on aircraft models or drones. It can be easily incorporated into an existing electronic circuit. Tutorial How to Use the 12V Green LED Beacon The 12V green LED beacon is ideal for adding a night navigation signal to your projects, such as drones or aircraft models. It’s easy to install and power up. What you need Arduino Uno USB Cable Power Supply 12V Resistor (check datasheet) LED Connectors Steps Check the operating voltage of the 12V green LED. If necessary, add a resistor to limit current. Connect the LED connector to the Arduino circuit or directly to the power supply. If using Arduino, connect the Arduino to a computer via USB and upload the provided sketch. Ensure that the LED lights up correctly. If it doesn’t work, check the connectors and resistor. Example Code void setup() { pinMode(LED_BUILTIN, OUTPUT); } void loop() { digitalWrite(LED_BUILTIN, HIGH); // Turn on green LED delay(1000); // Wait for a second digitalWrite(LED_BUILTIN, LOW); // Turn off green LED delay(1000); // Wait for a second } Mini-project Create a night navigation signal for an aircraft model or drone. Connect the beacon to the electronic circuit and test it in flight. Common mistakes Omitting the correct resistor, causing damage to the LED Incorrectly connecting the connector, preventing the LED from functioning Inadequate power supply (less or more than 12V), damaging the component Recommended accessories Variable resistors Wider connections Ambient light sensors Universal connection cables Frequently Asked Questions What is the battery life? Battery life depends on the capacity of the battery and the brightness level of the LED. Can it be used with a 5V circuit? No, it requires a power supply voltage of 12V. Use a voltage converter if necessary.