The NanoPi 2 Fire is a high performance ARM Board developed by FriendlyARM for Hobbysts, Makers and Hackers for IOT projects. It features Samsung's Cortex-A9 Quad Core S5P4418@1.4GHz SoC and 1G 32bit DDR3 RAM. It has a Gbps Ethernet port. It boots Android and Debian from a TF card. It integrates an HDMI and LCD interface. Its adoption of the Raspberry Pi's GPIO pin header makes it compatible with both Raspberry Pi's external GPIO modules and Arduino's shield boards. Its PCB dimension is 75 x 40 mm.
| Processor | Samsung S5P4418 Quad Core Cortex-A9, 400Mhz ~ 1.4GHz |
| PMU Power Management | AXP228, support software power-off, sleep and wakeup functions |
| System Memory | 1GB 32bit DDR3 RAM |
| Connectivity | Gbps Ethernet Port (RTL8211E) |
| USB | 1 xUSB Host 2.0Type A, 1 x MicroUSB for data transmission and power input |
| Storage | 1 x MicroSD Slot |
| LCD | 0.5mm pitch 45pin FPC seat, full color TFT LCD(RGB:8-8-8) |
| HDMI | 1 x HDMI 1.4A Type A, 1080P |
| Camera | 0.5mm pitch 24 pin DVP FPC seat |
| GPIO | 40pin, 2.54mm pitch pin header compatible with Raspberry Pi 2’s GPIO pin header |
| GPIO | 1 x Micro USB for power input |
| Debug Serial Port | 2.54mm pitch 4 pin header |
| User Key | K1(power key), Reset |
| PCB Dimension | 75 x 40mm, Six-layer |
| Power: | DC 5V/2A |
| OS/Software | u-boot, Android5.1, DebianJessie 8 |
English 
Português 
Deutsch 
Español 
Français 
Italiano