A9 quad-core PC card NanoPC-T2 onboard WiFi Bluetooth 4418 Ubuntu development board Andrews 5
The NanoPC-T2 quad core Cortex A9 single board computer is designed and developed by FriendlyARM for professional and enterprise users. It uses the Samsung Quad Core Cortex-A9 S5P4418 SoC with dynamic frequency scaling up to 1.4GHz. Compared to FriendlyARM's existing 4418 based boards the NanoPC-T2 has 8G eMMC onboard, audio jack and video input/output interfaces. Compared to its predecessor the NanoPC-T1 the NanoPC-T2 has built-in WiFi, Bluetooth and Gbps Ethernet port. In addition the NanoPC-T2 has power management which the NanoPC-T1 doesn't support. To avoid overheat issues the NanoPC-T2 has a heat sink with mounting posts.
The NanoPC-T2 combines all the ports and interfaces the existing FriendlyARM 4418 boards have. Currently it has the most interfaces and ports among all existing ARM boards of this size. Its rich video interfaces and support for HDMI 1080P enable it to work with not only popular display devices but also various FriendlyARM LCDs (both resistive touch and capacitive touch).
The NanoPC-T2 is FriendlyARM's most complete solution based on Samsung 4418 for both commercial and industrial applications.
SoC: Samsung S5P4418 Quad Core Cortex-A9 with dynamic frequency scaling up to 1.4G Hz
Power Management Unit: AXP228 PMU, it supports software power-off and wake-up.
System Memory: 1GB 32bit DDR3 RAM
Storage: 1 x SD Card Slot
Ethernet: Gbps Ethernet Port (RTL8211E) with unique MAC
Bluetooth: 4.0 dual mode
Antenna: Porcelain Antenna IPX Interface
Video Input: DVP Camera/MIPI-CSI (two camera interfaces)
Video Output: HDMI Type-A / LVDS / LCD / MIPI DSI (four video output interfaces)
Audio: 3.5 mm audio jack / via HDMI
Microphone: 1 x onboard Microphone
USB: 4 x USB 2.0 Host, two standard type A ports and two 2.54mm pitch pin headers
MicroUSB: 1 x MicroUSB 2.0 Client, Type A
LCD Interface: 0.5mm pitch 45 pin FPC seat, full color RGB 8-8-8
HDMI: 1.4A Type A, 1080P
DVP Camera: 0.5mm pitch 24 pin FPC seat
GPIO: 2.54 mm pitch 30 pin header
Serial Debug Port: 2.54mm pitch 4pin header
LED: 1 x power LED , 2 x GPIO LED
User Key: 1 x K1 (power), 1 x Reset
Other Resource: 1 x onboard thermistor
RTC Battery: RTC Seat Pins
Power: DC 5V/2A
Heat Sink: 1 x Heat Sink with mounting holes
PCB: Six Layer, ENIG
PCB Dimension: 100 mm x 60 mm
OS/Software: u-boot, Android 4.4, Android5.1 and Debian8