2 Channels 5V High Level Relay Shield With LED

2 Channels 5V High Level Relay Shield With LED

View More

3,82

Attualmente disponibile su ordinazione con consegna prevista entro 60 giorni circa dall'acquisto.

QuantitàPrezzo Unitario
12 - 49 3,63
50 - 99 3,55
100 + 3,44

Product Description

2 Channels 5V High Level Relay Shield With LED

product description:
1, the module in line with international safety standards, the control area and load the region has isolation trough;
2, the use of double-sided FR-4 circuit board design, high-end chip production process;
3, the use of loose music authentic relay control;
4, with power and relay action instructions, pull a bright, off does not shine;
5, the signal input terminal has a high signal, the common side and often open will be turned on;
6, the relay can directly control a variety of equipment and load;
7, there are two normally open and two normally closed contacts;
8, blue KF301 terminal connected to the control line is more convenient.
9, the module size: 41x41x18.5mm; Net Weight: 28g
Third, the technical parameters:
Relay version Static current Maximum current Trigger current Trigger voltage
  5V 5mA 190mA 2-4mA 0-1.5V
  12V 5mA 80mA 2-4mA 0-4V
  24V 5mA 50mA 2-4mA 0-8V
Module Interface:
First, the input part:
VCC: Connect the positive pole of the power (according to relay voltage)
GND: Connect the negative pole of the power supply
IN1: 1-way relay module signal trigger side
IN2: 2-way relay module signal trigger side
Second, the output part (relay output):
1, NO1: 1-way relay normally open interface, before the relay pull-in, after the short-circuit with the COM1
2, COM1: 1 relay common interface
3, NC1: 1-way relay normally closed interface, the relay before the short-circuit with the COM1, pull after the vacant
4, NO2: 2-way relay normally open interface, the relay pull before the suction, after the short-circuit with the COM2
5, COM2: 2-way relay common interface
6, NC2: 2-way relay normally closed interface, the relay before the short-circuit with COM2, pull after the vacant

High and low meaning:
High-level trigger refers to the VCC side of the positive voltage and the trigger side of the trigger connected to a trigger mode, when the trigger has a positive voltage or trigger voltage, the relay is pull.
Low-level trigger refers to the GND side of the negative voltage and trigger side connected to a trigger mode, when the trigger side voltage of 0V or low voltage can be triggered, the relay is pull.
Electrical parameters:
Voltage Version Quiescent Current Operating Current Trigger Voltage Trigger Current
  5V 4mA 135mA 2-5V 2mA
  9V 5mA 105mA 4-9V 3mA
 12V 5.5mA 95mA 4-9V 3mA
 24V 12mA 75mA 8-24V 3mA
Relay contact capacity: 250V 10A (AC) or 30V 30A (DC) (theoretical maximum load capacity), then the recommended AC power in 1500W the following, then 200W DC in the following.

Facebooktwitterredditpinterestlinkedinmail

There are no reviews yet.

Be the first to review “2 Channels 5V High Level Relay Shield With LED”