2.2 inch SPI TFT LCD Color Screen Module ILI9225 Drive IC 176*220

Product Description

2.2 inch SPI TFT LCD Color Screen Module ILI9225 Drive IC 176*220

Features:
1. Support all kinds of Arduino microcontroller line, without any wiring
2. The integrated voltage regulator IC, supports 5V or 3.3V power supply
3. On-board level translation programs truly perfectly compatible 5V / 3.3V IO level,
Support a variety of single-chip IO connection
4. The integrated backlight control circuit, can be controlled on-off or PWM dimming,
5. SD card into the expansion of the circuit,
6. Reserved SPI FLASH font circuits to facilitate the expansion application

Specification:

Module with regulator IC, and support 3.3V/5V power.

Contain power conversion module, perfectly compatible 3.3V/5V I/O interface, support a variety of microcontroller interface

With SD card, digital photo frame and other experiments can be done

Integrated backlight control module, you can close the backlight or use PMW to adjust the backlight brightness

Reserved SPI FLASH interface, Easy to expand

11PIN Standard wiring used IO:

1. VCC?Power supply (5V/3.3V)

2. GND– Power supply (GND)

3. GND– Power supply (GND)

4. NC?No connect

5. NC?No connect

6. LED– Pick IO control back light off or PWM brightness control

7. CLK?SPI clock signal

8. SDI?Serial data input pin

9. RS?Command (RS=0)/ Parameter (RS=1)

10. RST?Reset pin

11. CS– Chip selection pin

5 PIN Expand wiring used IO:

1. SD_CS?SD Cars chip selection pin

2. SD_MOSI?MOSI input

3. SD_MISO?MISO output

4. SD_SCK– SPI clock signal

5. F_CS– SPI FLASH signal

LCD screen parameters:

Resolution: 176×220

Driver IC: ILI9225