3PCS Reed Switch 2*14

3PCS Reed Switch 2*14

More details

ARD00897
New product

0,83 €

- +

Add to compare

Free Google QRcode module

 
More info

3PCS Reed Switch 2*14

Normally Open

Product Description

  • Product Name : Reed Switch;
  • Model : MKA-10110;
  • Contact Type : SPST (Form A);
  • Max. Contact Rating : 10W;
  • Max. Switching Voltage : DC100V
  • Min. Breakdown Voltage : DC 220V;
  • Max. Switching Current : 0.5A;
  • Max. Carry Current : 1.0A;
  • Max. Initial Contact Resistance : 100m?;
  • Min. Insulation Resistance : 1010?
  • Operate time : 0.4ms;
  • Bounce time : 0.4ms;
  • Release time : 0.1ms;
  • Resonant Frequency : 4000Hz;
  • Max. Operating Frequency : 500Hz
  • Pull in Value : 10-15AT;
  • Min. Drop out Value : 5AT;
  • Max. Contact Capacitance : 0.7pF;
  • Test Coil Resistance : 870?;
  • Glass Tube Size (Approx.) : 1.7 x 9.8mm/ 0.067" x 0.385"(D*L)
  • Lead Terminal Size(Approx.) : 0.3 x 16mm/ 0.011" x 0.63"(D*L)(Each Side);
  • Total Length (Approx.) : 41.6mm/ 1.639";
  • Color : Gold Tone, Green;
  • Weight : 3g;

 

Dry reed pipe specification parameter table:

Glass Length 14 mm
Glass Diameter 2 mm
The Total Length 45 mm
The Contact Form A
Max. Switching Voltage 300 VDC
Min. Breakdown Voltage 150 VDC
Max. Contact Rating 10 w
Max. The Switching Current 0.55 A
Max. Operate time 0.45 ms
Bounce time 0.25 ms
Max. Release time 0.35 ms
Resonant Frequency 5000 HZ
Max. The Operating Frequency 400 HZ
Pull in the Value AT 20-70.
Min. Drop out the Value 4 the AT
Max. Contact Capacitance 0.5 pF
Electrical Life 50-10 mvmuA - 1 x106

 

Dry reed pipe is short for dry reed pipe, is a passive electronic switch components of contact, it has a simple structure, small size is easy to control etc, and the shell is usually a sealed glass tube, the tube is equipped with two elastic reeds iron panels, poured a rhodium metal inert gas.At ordinary times, two of the glass tube made of special material is made of reeds are separated.When magnetic material near the glass tube, under the action of magnetic field lines, two reed tube been magnetized and attracted to each other contact, reed will suck together, so that nodes connect circuit is connected.Magnetic force disappears, two reeds due to the elasticity of itself apart, line is disconnected.Therefore, as a signal of the magnetic fields to control circuit switching device, with a dry reed pipe can be used as a sensor, is used to count, spacing and so on, in the security system is mainly used for making door magnetic, magnetic window), but also are widely used in all kinds of communications equipment.In practice, usually with a permanent magnet control this two pieces of metal on it or not, so is also known as "magnetron.

Dry reed pipe features and application:

1, the dry reed pipe structure is compact, the weight is small, can be installed in very limited space, very suitable for device miniaturization.

2, the switch of the dry reed pipe components be gas-tight seal in an inert gas atmosphere, will never contact with the external environment, long working life.

3, dry reed pipe without using sliding element, so will not appear in all the metals relegated metal fatigue phenomenon, to ensure that, in fact, no limit of the machine service life.

4, magnetic reed switch on the phone, program-controlled switches, duplicating machines, washing machines, refrigerators, camera, disinfect cupboard, door magnetic, magnetic window, electromagnetic relays, electronic instruments, level meter, gas meter, water meter and so on all obtained the very good application.

Dry reed pipe using the matters needing attention:

1, shearing or bending the dry reed pipe must be extremely careful when the lead foot, so as not to impose undue stress and make the glass to metal seal is damaged.The appropriate clamping tools must be used

2, meet the temperature and too long exposure time could lead to the glass to metal seal damage, cracking, leakage, etc.), so a rapid and reliable welding technique must be used (process).Manual welding welding conditions for advice: 280 ~ 300 ° C, wave soldering between 250 and 300  

 

 

  • Nome del prodotto: interruttore reed; modello: mka-10110; tipo di contatto: spst( sotto forma di una); max. Contattare rating: 10w; max. Tensione di commutazione: dc100v
  • Min. Tensione di rottura: dc 220v; max. Corrente di commutazione: 0.5a; max. Trasportare corrente: 1.0a; max. Iniziale resistenza di contatto: 100m?; min. Resistenza di isolamento: 1010?
  • Tempo di funzionamento: 0.4ms; tempo di rimbalzo: 0.4ms; tempo di rilascio: 0.1ms; frequenza di risonanza: 4000hz; max. Frequenza operativa: 500hz
  • Tirare a valore: 10-15at; min. Drop out valore: 5at; max. Contatto capacitivo: 0.7pf; test di resistenza della bobina: 870?; tubo di vetro dimensioni( di ca.): x 1.7 9.8mm/0.067" x 0.385"( d*l)
  • Piombo terminale di dimensioni( di ca.): 0.3 x 16mm/0.011" x 0.63"( d*l)( ciascuna parte); lunghezza totale( di ca.): 41.6mm/1.639"; color: tono oro, verde peso;: 3g;

 





Abbiamo disponibili datasheet di tutti i componenti, qualora non fosse presente nella scheda download del prodotto inviaci un messaggio dal modulo contattaci e lo pubblicheremo il prima possibile nel nostro sito.


Write a review

3PCS Reed Switch 2*14

3PCS Reed Switch 2*14

Write a review

 
Comments(3)
08/4/2017
Feedback ricevuto nel nostro negozio eBay http://stores.ebay.it/circuitointegrato

Tutto ok grazie

  • Was this comment useful to you?
  • (0) (0)
05/19/2017
Feedback ricevuto nel nostro negozio eBay http://stores.ebay.it/circuitointegrato

Materiale perfetto, spedizione rapidissima, ottimo venditore: 10++++++++++

  • Was this comment useful to you?
  • (0) (0)
05/5/2017
Feedback ricevuto nel nostro negozio eBay http://stores.ebay.it/circuitointegrato

Tutto bene.

  • Was this comment useful to you?
  • (0) (0)

2 other products in the same category:

Compare 0

No products

To be determined Shipping
0,00 € Total

Prices are tax excluded

Check out