Tunable 3-50cm E18-D50NK infrared obstacle avoidance sensor close switch smart car

Tunable 3-50cm, E18-D50NK, infrared obstacle avoidance sensor, close switch, smart car

More details

New product

7,90 €

- +

Add to compare

More info

Tunable 3-50cm; E18-D50NK; infrared obstacle avoidance sensor; close switch; smart car 



Tunable 3-50cm; E18-D50NK; infrared obstacle avoidance sensor; close switch; smart car




[Name] E18-D50NK
[Commodity] PCS,

Product Description This is a set of transmitter and receiver in one of the photoelectric sensor. Detection distance can be adjusted according to the requirements. The sensor has a detection distance by visible light interference small, cheap, easy to assemble, easy to use, and other characteristics, can be widely used in robot obstacle avoidance, pipeline piecework and many other automation products.

Photoelectric sensor (photoelectric switch) NPN normally open
Model: E18-D50NK.

Photoelectric switch E18 technical parameters:
1, the output current DC / SCR / Relay Control output: 100mA/5V powered
2, the DC current consumption <25mA
3, response time <2ms
4, point angle: ? 15 °, effective distance 3-50CM adjustable
5, detection of objects: transparent or opaque body
6, the working environment temperature: -25 °C ~ 55 °C
7, the standard sensing object: sunlight 10000LX The following incandescent 3000LX
8, Case Material: Plastic


Electrical characteristics:
I: 100mA
Sn :3-50CM


Diameter: 17MM
Sensor length: 45MM
Lead Length: 45CM


Goods production line automatic counting device
2, multi-function reminder
3, Maze Robot

[Note] for reliable and long life protection action, under the conditions of the relevant provisions of the outside temperature outside (outdoor) Avoid proximity sensor water structure, mounted on the hood, not allow water and water capacitive cutting oilleaching to be better to improve the reliability and lifetime. Please also avoid the chemicals used, especially in alkali, acid, nitric acid, Ming acid, hot concentrated sulfuric acid, etc. climate.

Red: then 4.5-5V supply high level

Yellow: connected microcontroller output TTL level to the microcontroller

Green: GND 0V to power low level

Front Accessible output high, there is an obstacle to the output port (yellow) level from high into low, a rear view of a potential obstacle detection distance can be adjusted, once adjusted potentiometer (such as the regulation of maximum distance of 50cm) in the effective distance (such as 40cm at obstructions, 10cm at obstacles) output low, low just to the microcontroller to identify.

Pull-up resistor 10K to 5V output of the yellow line circuit design can then access the microcontroller detection would be more stable, the microcontroller can be detected by external hardware interrupt INT0 INT1 to

Abbiamo disponibili datasheet di tutti i componenti, qualora non fosse presente nella scheda download del prodotto inviaci un messaggio dal modulo contattaci e lo pubblicheremo il prima possibile nel nostro sito.

17 other products in the same category:

Compare 0

No products

To be determined Shipping
0,00 € Total

Prices are tax excluded

Check out